equipinv_note
(
type: esriFieldTypeString, alias: Add each equipment type present, its quantity, and a photo. Repeat for every type on site., editable: true, nullable: true, length: 255, defaultValue: null, modelName: equipinv_note
)
componentssecure14
(
type: esriFieldTypeString, alias: 14. check to ensure all components are tight and secure, editable: true, nullable: true, length: 255, defaultValue: null, modelName: componentssecure14
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
componentsgaps16
(
type: esriFieldTypeString, alias: 16. check to ensure play components are free of extra holes & gaps that may harbor insects or inappropriate material, editable: true, nullable: true, length: 255, defaultValue: null, modelName: componentsgaps16
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
suspendedelem17
(
type: esriFieldTypeString, alias: 17. check moving suspended elements are connected to a fixed support with bearings or bearing surfaces that serve to reduce friction or wear, editable: true, nullable: true, length: 255, defaultValue: null, modelName: suspendedelem17
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
removetools20
(
type: esriFieldTypeString, alias: 20. check to ensure components are not capable of being removed without the use of tools, editable: true, nullable: true, length: 255, defaultValue: null, modelName: removetools20
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
rockinggap23
(
type: esriFieldTypeString, alias: 23. check all rocking/springing equipment for 1.8m (70.87 in) if intended for sitting and 2.1m (82.68 in) in direction of use if intended for standing., editable: true, nullable: true, length: 255, defaultValue: null, modelName: rockinggap23
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
steps43
(
type: esriFieldTypeString, alias: 43. check all steps, rungs, platforms, landings, walkways, ramps, stairways, etc. for even spacing within a horizontal tolerance of +/- 6mm (0.24 in) and horizontal tolerance of +/- 2 degrees and to ensure they do not trap water or accumulate debris, editable: true, nullable: true, length: 255, defaultValue: null, modelName: steps43
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
althandsupp47
(
type: esriFieldTypeString, alias: 47. check to ensure alternate hand support is available on steps with only one tread, editable: true, nullable: true, length: 255, defaultValue: null, modelName: althandsupp47
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
railrungdia48
(
type: esriFieldTypeString, alias: 48. check all handrails and rungs for diameter or maximum cross-section between 24-40mm (0.94 – 1.57 in) and that climbers have a means of hand support while climbing, editable: true, nullable: true, length: 255, defaultValue: null, modelName: railrungdia48
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
soleaccess49
(
type: esriFieldTypeString, alias: 49. check to ensure arch climbers and flexible components are not used as the sole means of access for users < 5, that flexible components are securely attached at both ends and that anchoring devices are below the full depth of the protective surfacing, editable: true, nullable: true, length: 255, defaultValue: null, modelName: soleaccess49
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
guardraildps51
(
type: esriFieldTypeString, alias: 51. check to ensure that guardrails and protective barriers do not contain a designated play surface (d.p.s. – flat surface greater than 51mm x 51mm (1.97 in) with a slope less than 30-degrees)., editable: true, nullable: true, length: 255, defaultValue: null, modelName: guardraildps51
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
guardrail500_52
(
type: esriFieldTypeString, alias: 52. check to ensure guardrails or protective barriers (to an appropriate height) are compliant on platformsabove 500mm (19.69in) for users 5 and allopenings are 375-mm (14.76 in) or less (or have a top horizontal rail), editable: true, nullable: true, length: 255, defaultValue: null, modelName: guardrail500_52
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
guardrail750_53
(
type: esriFieldTypeString, alias: 53. check to ensure protective barriers (to an appropriate height) are compliant on platforms above 750mm(29.53 in) for users 5 and all openings are 375-mm(14.76 in) or less (or have a top horizontal rail), editable: true, nullable: true, length: 255, defaultValue: null, modelName: guardrail750_53
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)
hira56
(
type: esriFieldTypeString, alias: 56. hira: check to ensure a hira (in accordance with clause 15.1 and annex j are present for any components not specifically identified in clause 15.2 through 15.19., editable: true, nullable: true, length: 255, defaultValue: null, modelName: hira56
, Coded Values:
[satisfactory: Satisfactory]
, [unsatisfactory: Unsatisfactory]
, [na: N/A]
)